- Photos & Details
- Specifications
Electric fence case:
The perimeter wall electric fence at a storage base in Chongqing has a total perimeter of 800 meters. Using Antongruida pulse electronic fence equipment, it was divided into 8 electric fence zones. Four Antongruida dual-zone pulse electronic fence hosts were set at the four sides of the wall, with 2 zones each, centrally controlled by the Antongruida pulse electronic fence control keypad.
Introduction to the electric fence:
The electric fence consists of two parts: the pulse electronic fence host and the electric fence front end. The front-end device is mainly the detector; to suit outdoor weather and reduce false alarms, a pulse electronic fence detector was selected.
When someone probes or touches the pulse electronic fence, they are repelled by the high-voltage pulse. If someone damages it or intrudes by force, when the detector senses the fence being damaged, an illegal climb-over, a short circuit or open circuit of the fence wire, or the host being maliciously opened, the detector issues an alarm signal transmitted through the alarm line to the management center. Security staff at the management center can quickly pinpoint the exact location of the climb-over via the electronic map. Through video linkage, the corresponding camera image pops up on the monitor, allowing security staff to observe the scene. The detector alarm also triggers the on-site siren and, at night, turns on on-site lighting to supplement the camera illumination.




- Previous: Linkage Output Module
- Next: 2024 Newly Prepared Feasibility Proposal for Substation Electronic Fence (Antongruida)
Please contact us right away or call the hotline: +86-13590284141. We will answer all your questions in detail. Project Manager Online