| Function | Specifications | Notes |
|---|---|---|
Slack Alarm |
Alarm triggered when the tension wire torque drops or the tension wire is broken | *Or open-circuit alarm |
Pressure Alarm |
Alarm triggered when tension wires are squeezed by external force | *Alarms when any tension wire exceeds the threshold |
Communication Failure |
Alarm when the connection between the tension fence energizer and the central keypad controller is interrupted | *Keypad communication-failure alarm must be enabled! |
Tamper Alarm |
Alarm triggered by the tamper switch when the tension control pole housing is opened unexpectedly | *The tamper function switch must be enabled |
Cut-Proof Alarm |
Alarm issued when tension wires are cut, producing a slack alarm | Case Center |
Touch Alarm |
Not available on tension electronic fences! | |
Function Description |
Functions:The most common tension electronic fence alarms are pressure and slack alarms; customized functions must be stated when ordering and re-quoted! Installation guidance:We can provide technical personnel for on-site installation guidance; the resulting travel expenses are borne by the customer (buyer). Price composition:The overall tension fence price includes main materials, auxiliary materials, labor, tax, construction sundries and more; the unit cost of each project varies. |
The on-site environment difficulty is the direct factor affecting the overall unit cost (*m/USD) of the tension electronic fence. |
Network Communication |
An emerging electronic fence communication method in recent years — simple and easy to commission. | |
485 Communication |
The most common communication method for tension electronic fences; bidirectional 485 communication ensures efficient reception and transmission of forward and reverse commands. | |
Product Parameters |
1. Control pole dimensions: 670*80*50mm 2. Input voltage: DC12~24V 3. Operating temperature: -10~55℃ 4. Zone division distance should not exceed 40M 5. RS485 bus communication function |
National standard parameters for electronic fences |
Zone Length |
The tension fence zone length should be set within 40 meters 1. The difficulty of the site wall determines the fence materials and additional zones needed 2. The wall length is the main factor in the overall cost of the tension fence |
The zone length should preferably not exceed 40 meters |
Zone Definition |
Electronic fence zone: the protected area of the electronic fence. Measured by the wall length; one zone represents one alarm signal! | *The wall length directly affects the overall cost |
| Type | Description | Notes |
|---|---|---|
Single/Dual Energizer |
Single-zone energizer: manages only one zone; dual-zone energizer: manages left and right zones | Selectable per customer preference |
Power Supply |
Input voltage: DC12~24V | Power adapter included with delivery |
Working Environment |
Operating temperature: -10~55℃ | |
Product Dimensions |
Control pole dimensions: 670*80*50mm | |
Control Pole Weight |
About 3.8KG | |
System Power Consumption |
<5W | |
Fence Height |
Overall height 800mm | |
Post Spacing |
≤4 meters |

Customer Communication

Site Survey

Factory Configuration

Overall Quotation

Contract Signing

Orderly Construction

Function Commissioning

Delivery & Operation
Site drawings: e.g., CAD, floor plans, photos, PDF, etc.
Low-voltage wiring: understand the on-site line environment, choose the communication method, and grasp construction difficulty
Site length: the electronic fence quotation list needs the wall length to configure most materials
Customer opinions: verbal and written requirements are key to smooth project acceptance
Zone requirements: the zone length directly affects the overall cost and the difficulty of security management
Linkage requirements: some customers require video linkage with surveillance to view electronic fence alarms
Other information: e.g., an existing tension electronic fence bill of materials, etc.
Technical guidance: free remote installation guidance via WeChat and phone
On-site guidance: on-site installation guidance available; travel expenses borne by the buyer
User handover: ensure the user understands the electronic fence operation flow upon delivery
Energizer maintenance: our electronic fence electrical equipment carries a (original-factory warranty) two-year repair policy
Fence maintenance: installed fence accessories are not under warranty; permanent cost-based maintenance is provided.
Renewal maintenance: an annual maintenance contract can be signed with us; equipment faults from the device itself are repaired or replaced free of charge
Upgrade maintenance: product upgrades are not within the free replacement scope; users need to purchase anew

Tension fence main materials: 35%
Low-voltage construction accessories: 20%
Construction labor: 33%
Tax cost: 10%
Other expenses: 2%

We firmly believe technology is the primary productive force. Only by continuously updating and upgrading products, working for customer needs and satisfying the products and functions of different sites, can we better adapt to more project needs and win market recognition!
Buying an Electronic Fence? Choose Us13 years of technical R&D and manufacturing of professional security products, supplying products to nearly 10,000 user organizations at home and abroad!
Our alarm products are exported to North America, South Africa and Southeast Asia, holding an advantageous share in the domestic market.
Free project quotation; different solutions for different sites to meet customers' various security needs.
| Product Series | Shenzhen Antongruida Technology Co., Ltd. | Other Small-Scale Companies |
|---|---|---|
| Pulse Electronic Fence | Self-developed dual-core chip pulse system with full independent copyright |
Generic old-generation system with no independent update capability |
| Tension Electronic Fence | 485, network and CAN multi-line signals selectable |
Generic signal protocol; switch acquisition not controllable |
| Laser Intrusion Detection | Intelligent acquisition works normally in various environments |
High false alarm rate; very low object detection capability |
| Vibration Optical Fiber Cable | Intelligent waveform detection with high sensitivity to external changes |
Weak vibration-wave recognition; easily misses important alarms or false alarms |
| Buried Leaky Cable | Industry-first multi-signal isolated collection of human infrared waves to avoid false alarms |
Unstable signal transmission; cannot avoid alarms triggered by small animals |
| Bio-Sensing System | Dual intelligent sensing of pulse and human biology; single or multiple working modes |
Single function, proximity alarm only; cannot reduce false alarms |
| Infrared Beam Detection | 4th-generation infrared lens and chip sensing with extremely low false alarm rate |
Outdated design, obsolete and cheap; being phased out |
| Infrared Light Grid | Aluminum housing profile with built-in high-quality circuit board and multiple isolation protection |
Poor materials; easily deformed and damaged in long-term outdoor use |
| Bus Alarm System | Up to 1024-zone bus system integration; multiple modules shared across platforms |
Small bus system, hard to expand, high maintenance cost, not smart to operate |
| What You See Is What You Get | Material quotation lists with visible images; goods consistent with samples |
Quotations without images; unclear materials, unguaranteed goods arrival |
More comprehensive security technology products adapting to different application fields
Antongruida · Founded in 2013 · Over a decade in security · Serving national engineering projects!