- Photos & Details
- Specifications
Note: The communication signal of this product is only compatible with the transmission of the Antongruida perimeter alarm system and is not sold separately.
Introduction:
The main purpose of the bus linker is to centrally collect the alarm signals of each zone of perimeter products such as Electronic Fences and output them as relay (switch) linkage signals. It converts the Electronic Fence alarm signals on the RS485 bus into corresponding switch signals for the relevant zones, for centralized alarm linkage. It is installed in the security room to add more alarm linkage output functions.
The main functions of these linkage signals are as follows:
1. They can be used to link a wall-mounted electronic map reflecting the on-site terrain of products such as Electronic Fences, allowing users to intuitively see from the LED electronic map which location on the perimeter has an intrusion alarm signal, and the corresponding LED on that section of wall lights up as an intuitive indication;
2. They can be used for centralized video surveillance linkage. In this case, the surveillance system to be installed must have alarm functions or alarm linkage input functions, which should be discussed and configured with the surveillance equipment manufacturer;
3. They can link devices such as searchlights, Audible and Visual Alarms and sirens.
产品技术参数：
供电电源： DC12V；
使用环境： 温度：-40~+50℃
湿度：≤95%。
Please contact us right away or call the hotline: +86-13590284141. We will answer all your questions in detail. Project Manager Online