Case Study: Infrared Beam Detector Installation at a Chemical Plant in Nanning, Guangxi
Case Study: Infrared Beam Detector Installation at a Chemical Plant in Nanning, Guangxi
Case Study: Infrared Beam Detector Installation at a Chemical Plant in Nanning, Guangxi
Brand: Antongruida
Model: TDS-GY-T
Features: Touch alarm: when a hand touches any detection cable, the system immediately senses and alarms. Effective even with gloves or through clothing.
Cut alarm: when pliers touch or cut any detection cable, the system immediately alarms.
Approach alarm: when the sensitivity threshold is properly adjusted, the system immediately alarms when a person approaches the sensing fence.
  • Photos & Details
  • Specifications

Case Study: Infrared Beam Detector Installation at a Chemical Plant in Nanning, Guangxi


Advantages of Infrared Beam Detectors:

1. The infrared beam is invisible to the human eye, providing covert protection that alerts intruders before intruders are aware of it.

2. Traditional active infrared intrusion detectors have a low protection plane and tend to have blind spots or dead corners, while multi-beam long-distance infrared curtain products are free of blind spots and dead corners.

3. Complete protection: intruders cannot pass through the invisible infrared beam barrier by rapid jumping (only products that trigger the alarm within >=20ms have this function), crawling, or other movements.

4. Excellent anti-interference performance: the alarm is triggered only when all infrared pulse-coded beams are blocked. When insects, falling leaves, or small animals cross the infrared beam barrier, they cannot fully block all pulse-coded beams, so no false alarm is generated.

5. Tamper resistance: when the power or signal line of the infrared receiver is cut, the alarm output circuit automatically sends a wireless alarm signal.

6. Round-the-clock operation. The Infrared Beam Detector complies with the national standard GB10408.4-2000 Active Infrared Intrusion Detectors, Section 4.1.7 Detection Distance b) Outdoor use: the maximum beam distance of an active infrared intrusion detector shall be at least six times the detection distance specified by the manufacturer, so as to resist attenuation of the beam caused by rain, fog, haze, strong water vapor, and strong sunlight, as well as interference from strong wind (especially crosswind) that deflects the beam.



产品名称:甚低频生物感应围栏主机 / 生物感应探测器

产品型号:TDS-GY-T01/02

通讯模式:CAN总线通讯

报警方式:接近/触摸/翻越感应/断线/断电/防拆

灵敏阀值:64档

抗扰阀值:1~8档

工作频率:A/B/C/D/E/F/G/H 8频段

频率幅值:40~60V

警戒长度:≤300米(围栏长度)

工作环境:-40℃~+70℃,0~95%相对湿度、无冷凝

报警输出:支持,防区报警独立输出DC12V

供电方式:AC110~240V/DC12V/蓄电池12V7AH

消耗功率≤15W

产品规格:300× 200 ×100mm/2Kg

感应电缆:外径:φ3mm  外层抗紫外线

电缆馈线:标准长度3米,馈线与探测器BNC接口连接

联动兼容:支持,报警开关量独立输出(常开/常闭任选),联动控制LED探照灯/地址模块等其它报警设备

围栏线制:二、三、四、六、八线制,单个防区≤30米


With years of R&D and manufacturing in the alarm industry, we adhere to the principle of "product quality first, technology constantly updated" and have supplied quality security products to more than 4,000 engineering companies, earning unanimous praise from security users. If you need pulse electronic fences, tension electronic fences, vibration optical fiber cables, infrared beam/light grid detectors, home gas & smoke detectors and more...
Please contact us right away or call the hotline: +86-13590284141. We will answer all your questions in detail. Project Manager Online

Which alarm product do you need? Contact us now!

Antongruida · Founded in 2013 · Over a decade in security · Serving projects nationwide!