- Photos & Details
- Specifications
2-beam Laser Intrusion Detector
Exquisite craftsmanship, opening a new era of Laser Beam Detectors
Intelligent frequency conversion + secondary signal processing
Lower false-alarm rate
Intelligent frequency conversion technology gives each pair of beams a unique transmitting and receiving frequency, reducing crosstalk interference between beams
Adopting secondary signal processing technology, it can effectively suppress interference from harsh environments such as wind, frost, rain, snow and fog, with better stability
All-metal body
Forged into rock-solid quality
304 stainless steel housing, aluminum alloy central support column, and die-cast aluminum one-piece base; the rational use of metal provides sufficient strength and corrosion resistance for laser alignment, forging its rock-solid quality.
Beam-blocking alarm adjustable
You can set blocking of any one beam, two beams or multiple beams to trigger an alarm, meeting more applications. Alignment mode and working mode can be freely switched, making alignment simpler and more efficient.
Adopts high-precision optical filter
Eliminates light interference
Adopts a high-precision optical filter made of more than 40 layers of chemical deposition processing, eliminating interference from sunlight or other stray light
Beam alarm time adjustable
Supports custom alarm trigger response time (50ms/100ms/300ms/700ms optional), which can be set according to the on-site environment to avoid false alarms caused by vegetation, birds, etc.
Protection grade IP67
Welding + silicone ring sealed assembly
For waterproofing, it adopts seamless welding technology + silicone ring sealed assembly and a fully enclosed design, with a protection grade as high as IP67; it performs excellently even under one meter of water.
Practical "universal" key
A "universal key" is designed on each of the transmitter and receiver ends of the Laser Beam Detector, enabling setting of blocking-beam alarm, blocking time, beam switch and tamper switch; rich functions, convenient debugging.
Laser guide
Faster and more accurate alignment
The laser guide is an auxiliary alignment device for Laser Beam Detectors. During alignment, through the audible and visual prompts of the guide combined with the digital display of beam signal strength, alignment can be achieved quickly, effectively solving the difficult alignment problem of traditional Laser Beam Detectors.
Product features:
The digital display shows signal strength, allowing real-time display of tiny changes in each beam, making debugging simple and convenient.
Intelligent frequency conversion technology: each beam has a corresponding transmitting and receiving frequency, effectively reducing crosstalk interference between beams.
The alarm mode uses beam-blocking alarm; you can set blocking of any one or two beams to trigger an alarm, suitable for various environments and applications.
Each beam can be individually masked or turned on, suitable for various special requirements or environmental applications.
Free switching between working mode and debugging mode, optimizing the complex operations during alignment.
The housing is made of 304 stainless steel for good corrosion resistance; the central support column is integrally extruded aluminum alloy for good load-bearing; the base is die-cast aluminum one-piece for good fixing and load-bearing.
Warning distance 0-500m for long-distance protection.
Non-visible laser light source design makes the product more concealed and safer to use.
Selected imported original laser head, service life >150,000 hours.
Laser Class 1; under any conditions, the eyes will not be exposed to harmful optical radiation.
The laser infrared beam is more focused with stronger penetration, effectively suppressing interference from harsh natural environments such as wind, frost, rain, snow and fog, with better stability.
Transmitting angle of the transmitter end: <8'; receiving angle of the receiver end: >10 deg.
Each beam supports independent angle adjustment; the optical axis can be adjusted horizontally +/-15 deg and vertically +/-15 deg.
Standard bracket accessories allow direct installation on top of the Laser Beam Detector, such as: infrared cameras, alarm lights or searchlights.
Alarm trigger response time 50ms/100ms/300ms/700ms, meeting users in different environments.
Waterproof grade reaches IP67, with good waterproofing; it can still waterproof well even when immersed over 1 meter under water.
Supports one set of relay output, normally open/normally closed optional; contact capacity: AC125V/0.5A, DC24V/1A.
Technical parameters:
Outdoor warning distance: 0~500m
Detection method: alarm when the laser beam is cut
Laser infrared wavelength: 980nm
Class I safety laser light source: CLASS I
MTBF: >120,000 hours
Distance between two beams: no less than 15cm
Transmitter end divergence angle: <8''
Receiver end receiving angle: >10 deg
Optical axis adjustment angle: horizontal +/-30 deg vertical +/-30 deg (range adjustable)
Response time: 50ms/100ms/300ms/700ms adjustable
Alarm time: 1~30s optional
Beam frequency: 8 options, each beam has a unique frequency
Power supply voltage: DC9~30V / AC9~20V
Operating current: 90~150mA
Alarm output: 1C relay contact output, NC/NO contact capacity AC125V/0.5A, DC24V/1A max
Tamper switch: normally closed, alarms when the housing is removed; contact capacity: AC125V/0.5A, DC24V/1A
Material: housing: 304 stainless steel; central support column: aluminum alloy; base: die-cast aluminum
Protection grade: IP67
Operating environment: temperature -25 deg C to 70 deg C / humidity: 95% max
Mounting hole dimensions: 4 evenly distributed 10-mm holes
Product models:By number of beams
Single-beam Laser Intrusion Detector: QN-J001
2-beam Laser Intrusion Detector: QN-J002
3-beam Laser Intrusion Detector: QN-J003
4-beam Laser Intrusion Detector: QN-J004
6-beam Laser Intrusion Detector: QN-J006
8-beam Laser Intrusion Detector: QN-J008
10-beam Laser Intrusion Detector: QN-J0010
12-beam Laser Intrusion Detector: QN-J0012
&Additionally, by detection distance, each is divided into 100m, 200m, 300m, 500m, etc.
技术参数：
室外警戒距离：0~500m
探测方式：激光射束被切断报警
激光红外波长：980nm
一类安全激光光源：等级为CLASSⅠ
MTBF：＞120000小时
两个光束间的距离：不小于15cm
发射端发散角度：＜8′
接收端接收角度：＞10°
光轴调整角度：水平±30° 垂直±30°(范围可调)
响应时间：50ms/100ms/300ms/700ms可调
报警时间：1~30s可选
射束频率：8种可选，每一光束有唯一频率
电源电压：DC9～30V/AC9～20V
工作电流：90~150mA
报警输出：1C继电器接点输出，NC/NO接点容量AC125V/0.5A、DC24V/1A max
防拆开关：常闭，当外壳被移去时报警、触点容量：AC125V/0.5A、DC24V/1A
材质：壳体:304不锈钢；中心支撑柱：铝合金；底座：压铸铝
防护等级：IP67
工作环境：温度-25℃~70℃/湿度：95% max
安装孔尺寸：4个∮10孔均匀分布
产品型号：按光束分
单光束激光入侵探测器：ABL-J1001
二光束激光入侵探测器：ABL-J1002
三光束激光入侵探测器：ABL-J1003
四光束激光入侵探测器：ABL-J1004
六光束激光入侵探测器：ABL-J1006
八光束激光入侵探测器：ABL-J1008
十光束激光入侵探测器：ABL-J10010
十二光束激光入侵探测器：ABL-J10012
&另外按探测距离各分为100米、200米、300米、500米等
- Previous: 没有了！
- Next: 10-Beam Laser Intrusion Detector (2nd Generation)
Please contact us right away or call the hotline: +86-13590284141. We will answer all your questions in detail. Project Manager Online