This system adds array interval positioning to the vibration detection cable. The system can not only detect the amplitude of the vibration signal but also report the interval position information of the vibration cable. The alarm sensitivity of the vibration cable can be independently adjusted in sections to adapt to the tightness of the fence. Each segmented vibration cable is 1 to 50 meters long, divided during on-site installation; any Zone can be armed/disarmed/parameter-configured arbitrarily. When the cable near the fence detects a vibration intrusion signal, the system can quickly lock the intrusion position.
Technical Parameters
Power Supply: AC220V/50HZ/DC24V-48V
Output Interfaces: Carrier communication interface, switch output interface, bus communication interface, TCP/IP communication interface, Zone alarm DC output interface
Operating Environment: -40C to +65C, relative humidity: <=95%
Dimensions: L300mm x W200mm x H110mm
Display Screen: Dot-matrix full-information LCD screen
Weight: Whole unit weight 5kg
Power Consumption: <=15W
Warning Length: A single unit can manage a perimeter of <=3000 meters
Positioning Accuracy: 1m-50m positioning accuracy adjustable; Zone sections can be set according to the importance and location of the Zone
Communication: TCP/IP network communication
Output Isolation: Alarm output relay contact isolation voltage >10KV
Alarm Types: Intrusion/short circuit/broken wire/power loss/tamper/fault
Identification Frequency: Can identify ultra-low frequency signals of 0.01HZ and directly distinguish signals such as wind and rain, separating environmental interference from human intrusion signals
Power-off Memory: After the detector and nodes are powered off, they can memorize the original working status and system parameter information
Real-time Status: Real-time operating status includes arm/disarm status, node status, whether alarm is triggered, communication status, and fault information
Alarm Output: Each Zone supports independent switch output (NO/NC) and DC12V output
Zone Switch: Each Zone supports independent enabling or disabling of alarm
Housing Material: The housing of the detection connection unit is made of PC material, can be installed outdoors in the open, and can withstand continuous rain washing for 7*24 hours while operating normally
Waterproof Rating: Detection connection unit waterproof rating IP68
Sensitivity: 64-level sensitivity adjustment with 8-level H coarse adjustment and 8-level L fine adjustment
Anti-interference: Adjustable anti-interference level from 1 to 8
Overload Protection: Self-protection when the device current is too high (short circuit protection)
Fault Auto-disconnect: When the detection connection unit has a fault current that is too high, it automatically disconnects from the communication/power bus
Carrier Communication: One-cable design integrates communication and power supply to reduce costs
Ultra-low Power: <=10W in armed state for a 1000-meter perimeter
Alarm Records: The detector can independently store 254 alarm records
Installation Method: M type/S type/C type/straight type
Installation Environment: Various wire mesh fences, wrought-iron fences, plastic-steel, brick walls, etc.
- Previous: Case Study: Electronic Fence for a School in Diqing, Yunnan
- Next: 没有了！
Please contact us right away or call the hotline: +86-13590284141. We will answer all your questions in detail. Project Manager Online